By Clarus Content Team · Published 19 noviembre 2026
Swisslog’s warehouse management system is SynQ, a software platform that Swisslog says combines a warehouse management system (WMS), warehouse control system (WCS), material flow control (MFC) and supervisory control and data acquisition (SCADA) in one platform. Swisslog calls SynQ “the intelligent core of automated intralogistics”, so it is software built around automation first and the rest of the warehouse second.
Swisslog is a warehouse automation integrator rather than a conventional WMS vendor. Swisslog describes itself as “a global warehouse automation integrator headquartered in Aarau, Switzerland”, and it combines storage and retrieval systems, conveyors, robotic picking and palletising, warehouse software and lifecycle services. KUKA, its parent, calls itself “a global leader in automation solutions”. This guide explains what SynQ is, what the layer names mean in Swisslog’s own vocabulary, how the software connects to its hardware, and the questions a 3PL or mid-sized warehouse should answer before it looks at Swisslog.
If the category is new to you, the general definition of a warehouse management system is a useful starting point before you read vendor material.
Who owns Swisslog and what it sells
Swisslog traces its roots to Sprecher + Schuh AG in Aarau in 1900, and Wikipedia gives the same origin and the 1994 rename to Swisslog. Swisslog’s own history says it integrated its first AutoStore system in 2010 and was acquired by KUKA in 2014. Swisslog says it is part of the KUKA Group, and Wikipedia describes it as a wholly owned subsidiary of KUKA.
Swisslog says its logistics business serves industries such as food and beverage, grocery, fashion and general merchandise, and it reports more than 3,000 employees at over 30 locations worldwide. Swisslog Healthcare is a separate brand for hospitals and healthcare facilities, and this guide does not cover it. Swisslog’s about page sets out the distinction.
What SynQ is, in Swisslog’s own words
SynQ is the software Swisslog builds around its automation. Swisslog describes SynQ as an “intelligent intralogistics platform” and says it “orchestrates automation, data, and workflows across the warehouse ecosystem”. The same page says SynQ is built to work with Swisslog, AutoStore and further third-party equipment, and that it can be deployed on-premises or in the cloud.
Swisslog lists four SynQ modules on the same page. Each description below is Swisslog’s own:
- SynQ Quickstart: a way to operate AutoStore goods-to-person and pallet AS/RS storage systems.
- SynQ Compose: for tailored solutions, where Swisslog says the system logic sits in SynQ rather than in the host system.
- SynQ Cockpit: dashboards and KPIs.
- SynQ Digital Twin: what Swisslog calls a real-time virtual replica, with subsystem emulation. The name is Swisslog’s product name.
WMS, WES, WCS, MFC and SCADA: Swisslog’s vocabulary
Most of the confusion around Swisslog comes from the layer names. Swisslog’s software overview page separates them, and that separation is the key to reading its product range.
| Term | What Swisslog says it does |
|---|---|
| SGA | Directs and executes warehouse, distribution and fulfilment operations, planning towards business goals. |
| WES | A newer generation of software built for highly automated warehouse environments, handling real-time execution. |
| WCS | A bridge between the WMS and MFC, or lower-level control or PLC systems. |
| MFC | A specialised traffic controller on the warehouse floor. |
| SCADA | Generally a standalone system for equipment maintenance. |
Source for the table: Swisslog’s software overview, which also says SynQ “offers a warehouse execution platform that spans across the layers”. For general definitions, Wikipedia covers warehouse control systems, warehouse execution systems y SCADA.
Swisslog says a WMS plans towards business goals while a WES handles real-time execution, and that automated sites typically need both. Our guide to the types of warehouse management systems covers the same distinctions without reference to any one vendor.
How the software connects to Swisslog’s automation
The software exists to run Swisslog’s automation, so the hardware is the next thing to understand. If the terms are new, our guide to robots en la logística de almacenes covers the general context.
Swisslog’s AutoStore page describes AutoStore as “a unique and simple solution that uses robots and bins”. Bins stack directly on each other in an aluminium grid that also serves as the track for the robots, which retrieve bins and bring them to picking ports. Swisslog says SynQ links AutoStore control functions with customer-specific components, such as existing ERP, WMS and material-flow systems. AutoStore itself is a system from Norway’s AutoStore AS that Swisslog integrates, as Wikipedia notes and the AutoStore article explains. For the general concept behind systems like this, see our guide to automated storage and retrieval systems.
Swisslog’s other systems follow the same pattern. Its CycloneCarrier page calls it “an automated shuttle system for storage of small loads” that handles totes, trays and cartons, and Swisslog pairs it with its SynQ software. Its PowerStore page describes a “high density pallet shuttle solution” whose control software is, in Swisslog’s words, fully integrated in the SynQ suite. Swisslog’s product overview lists further systems, including AgileStore, Vectura, CarryPick, ProMove and ItemPiQ, and this guide does not describe them.
On the host side, Swisslog says SynQ “can interface to existing WMS or ERP” and “picks up where the WMS or ERP leave off”, as set out on the software overview page. El SynQ product page describes seamless host integration for data transfer and handover, but it does not name a specific ERP. A buyer should therefore ask which host system the software would sit under, rather than assume one.
Two software routes: SynQ, or SAP EWM with Swisslog automation
Swisslog offers two software routes. The first is SynQ as its own platform. The second is SAP’s warehouse software, SAP Extended Warehouse Management (SAP EWM), with Swisslog automation connected underneath. Swisslog says it has been a Service Partner of SAP since 2012 and that it offers “no additional software between SAP EWM and the automation”. It also says it can “seamlessly integrate automation into SAP EWM using the SAP Material Flow standard”. In that set-up, Swisslog describes SAP EWM as the host and SynQ as the WES, as set out on its SAP EWM page.
For a plain explanation of the SAP product itself, read our guide to SAP EWM and what 3PLs should weigh. Swisslog does not say which route is better for a given operation, and this guide does not either.
Who a Swisslog set-up suits, and the questions to answer first
Swisslog’s material is written around automated sites. Whether that fits your operation depends on four questions, and you answer them about your own business rather than about any vendor.
- Is the site automated, or planning automation such as AutoStore, shuttles or pallet AS/RS? If it is, Swisslog’s automation range is a serious reference point. Our buyer’s guide to warehouse automation companies covers how to choose an automation partner in general.
- Does the business already run, or plan to run, SAP EWM or another host WMS or ERP that the automation must sit under? Map that boundary before any vendor conversation, because the automation has to connect to it.
- What does the software need to do day to day for people working without automation? Receiving, putaway, picking and despatch on RF scanners make up most of a manual or lightly automated operation, and the system has to support them whatever runs on the floor.
- Does the business run multi-client 3PL operations, with customer-facing stock visibility and billing? If it does, test how each candidate separates clients, shows stock to each client and handles per-client charges, because those needs sit alongside any automation project rather than inside it.
What to ask a vendor before a demo
Whichever route you consider, the same questions help you compare what each vendor puts in writing. Ask Swisslog, or any other vendor, to answer these for your own site:
- Which host system the software sits under, and how data passes between the two.
- How clients see their own stock, and how per-client charges are recorded.
- How receiving, putaway, picking and despatch are set up for people on RF scanners at a site with no automation.
- A written go-live plan, with the people and dependencies it assumes on both sides.
Where a purpose-built 3PL WMS fits
If the answer to the first question is no, and the operation is manual or lightly automated, the choice is a different kind of decision. Mathew Buttar, Head of Solutions at Clarus, makes the general point about choosing any system: “It doesn’t necessarily have to do the function. It should complement the function and process of the business that needs it.”
Clarus WMS is cloud-native and built for 3PL work. Clients can log in to a portal del cliente to see their stock, or a 3PL can send them a daily stock report by email. Scanning teams can use flujos de trabajo portátiles on Android devices, with the scanning steps customised to how the site works.
This guide does not suggest that Clarus works with Swisslog’s automation or could stand in for SynQ on an automated site. Swisslog’s own pages describe SynQ as the layer that runs that automation, so the two answer different questions.
Habla con un experto en almacenes
Si estás valorando tus opciones y quieres ver cómo funciona en la práctica un sistema de gestión de almacenes (WMS) diseñado específicamente para este fin, merece la pena que hables con Clarus. Colaboramos con proveedores de logística externos (3PL) y distribuidores de todo el Reino Unido para implementar un software de gestión de almacenes que se adapte a tu forma de trabajar, y no al revés.
Ponte en contacto con nuestro equipo para discutir tus requisitos.