WMS for Amazon FBA: How a 3PL Runs FBA Prep

How a 3PL or prep centre runs Amazon FBA prep through a WMS: goods in, FNSKU labels, sets, cartons, pallets, booking and charging.

Índice

A WMS for Amazon FBA is the warehouse system a logística de terceros (3PL) provider or prep centre uses to receive a seller’s stock, label and bag it, build the cartons and pallets, and record each prep task against the client who owns the stock. Amazon sets the packaging, barcode and box rules, and the seller creates the shipment. The warehouse system runs the physical work in between, so every unit leaves the building matching those rules.

This guide is for 3PL operations managers and prep centre owners running FBA prep. It follows the job in order, from goods in to booking the delivery, and ties each step to a requirement Amazon publishes. Amazon describes Fulfilment by Amazon as a storage, shipping and customer service programme: sellers send products to Amazon fulfilment centres, and Amazon picks, packs and ships the orders. Amazon changes its pages, so check Seller Central for the current rules. The requirements below are as published by Amazon in November 2026.

Clarus WMS is built for 3PL work, with multi-client stock control, scanning, kitting and billing around the prep. The WMS para 3PL page covers the wider model.

The FBA prep job at a glance

Amazon asks sellers to prepare products following its packaging and prep requirements. Those rules cover every unit, bag, set and carton, so a prep centre should work from them directly rather than from memory.

Barcode rules changed in 2026. Under Amazon’s FBA barcode requirements, since 31 March 2026 brand owners can keep using manufacturer barcodes without stickers, but resellers must use Amazon barcodes even when a product has a manufacturer barcode. A prep centre handling resold stock will need more Amazon labels than before.

Prep stepWho sets the ruleWhat the WMS records
Goods inSeller’s inbound instructionsCounts by scan, shortfalls and damage
LabellingAmazon barcode and FNSKU rulesLabel applied and checked by scan
Sets and bundlesAmazon set labelling and sealing rulesEach set build as a task against the client
CartonsAmazon box rules, one shipment ID per boxBox contents and weights
Shipment planSeller, in Seller CentralPacked stock checked against the plan
Box and pallet labelsAmazon FBA box ID and pallet label rulesWarehouse pallet identity, kept separate
Delivery bookingAmazon appointment rules, booked in Carrier CentralDispatch references and quantities

Goods in: check the stock before it is labelled

Every FBA job starts at goods in. Count each delivery by scan against the seller’s inbound instructions, and log any shortfall, overage or damage before a label is printed. That record is the evidence the prep centre needs if the seller later disputes the count.

Clarus runs goods in through handheld inbound workflows, and the full process is covered in our goods-in guide. Two standard flows are built in. If the inbound data carries the pallet SSCC, batch, quantity and product code, one scan of the pallet barcode accepts all of it. If it does not, the handheld reads the barcodes already on a standard GS1 label, which usually carries the article number and quantity, the batch and the SSCC.

Labelling: FNSKUs, barcodes and the one-scan test

Amazon’s label rules require each Amazon label to show the ASIN or FNSKU, the product name and the item condition. Every other visible barcode must be covered, except serial number barcodes and Transparency codes. A label must never cover warning, safety or compliance information, or food information such as ingredients, allergens and best before dates. Amazon’s FBA label page also asks for thermal or laser printing at 300 dpi or more, not inkjet, on black ink on white stock that stays scannable for 24 months.

Each unit also needs its own scannable barcode, placed away from corners and curves. Each variation, size or colour needs a different FNSKU, and so does each condition. The packaging page sets out both points.

Mathew Buttar, Head of Solutions at Clarus, puts the labelling test in one line: “Best practice is one, have you got a label? And two, can you scan it?” That is the check to build into every receipt and every packing step. Clarus’s lectura de códigos de barras can be set to read the GS1 application identifiers a label carries, so the data comes from the label rather than from someone keying it in.

Sets, bundles and poly bags

A set is harder than a single unit because the items inside carry their own barcodes. Amazon’s packaging page asks for a set to carry a label saying it is sold as a set, for example “This is a set. Do not separate”. The set must be sealed so it cannot be separated, and the barcodes on the items inside must not face outward or must be covered. If the individual items already have an ASIN, the set needs its own.

Clarus models kits as conversions, meaning a parent product built from components. Clarus’s Soporte para kits y ensamblaje can run two ways. In a value-added or co-pack area, operatives build the set at a bench. Or the set is assembled on pick, where the picker collects each component and the set leaves as one product. Which one suits depends on space, labour and how much of the service you offer. Our kitting guide covers the trade-off. Mathew Buttar’s view is that a site assembling on pick probably does not do kitting often enough to justify a bench.

Poly bags have their own rules. Amazon asks for transparent bags at least 1.5 mil thick, completely sealed, and extending no more than 7.5 cm beyond the product. The barcode must scan through the bag, or the label goes on the outside. A bag with an opening over 12 cm must carry a suffocation warning.

Cartons: build to Amazon’s box rules

Each box must hold stock from one shipment ID only, and its contents must match the shipping plan. Boxes must be rigid and six-sided, with flaps intact. Amazon’s box and routing page sets a limit of 63.5 cm on any side and 23 kg for a box of standard-size items. Any box over 15 kg needs a Team Lift or Heavy Parcel label on the top and sides.

Accepted packing materials are bubble wrap, full sheets of paper, inflatable air pillows and polyethylene foam sheeting. Packing peanuts, foam strips, crinkle wrap, shredded paper and Styrofoam are not accepted. Boxes must not be strapped or taped together into bundles. Packing runs through Clarus’s empacar escritorio. For safe handling of heavy cartons at the bench, the HSE’s orientación sobre el almacenamiento is the place to start.

The shipment plan and box content

The seller creates the shipment plan in Seller Central, and the prep centre packs to it. Each box needs accurate box content information: the unit quantity of each SKU, expiry dates where they apply, and the box weight and dimensions. Amazon accepts this through a Seller Central web form, a file upload, a 2D barcode on each box, or an XML file through the Selling Partner API. If the information is not supplied, Amazon processes the box manually for a fee. The details are set out on Amazon’s box content page.

Products that expire need the expiry date on the box in 36-point or larger font, and on each unit, in DD-MM-YYYY or MM-YYYY format. A lot number alone is not enough, as the packaging page makes clear.

Clarus’s Amazon integration covers a different job. It handles Amazon orders for stock the warehouse fulfils itself. Orders come in, are allocated, picked and packed in Clarus, and shipment confirmation, tracking and stock levels go back to Amazon. The shipment plan, FNSKU labels and FBA box and pallet labels come from the seller’s Seller Central account, and the WMS runs the physical work around them.

Where a seller splits stock between FBA and its own channels, the count should be held once. Multichannel inventory management is the right place to see that single count.

Pallets, box labels and the warehouse’s own pallet identity

Each box and pallet sent to an Amazon fulfilment centre needs its own unique FBA box ID or pallet label. Labels are printed from the shipment workflow in Seller Central, and each one must be unique, so labels must not be photocopied or reused. A label must not sit on a seam or opening, and the FBA label goes beside the carrier label with both left uncovered. Each pallet carries four labels, one in the top centre of each side. Supported sizes are 8.4 x 10.2 cm, or 10.2 x 15.2 cm on a thermal printer. Amazon’s shipping label page has the full rules. Labels printed outside Seller Central, or by a third-party provider, must still carry every label element, as the box and routing page notes.

For pallets, Amazon accepts UK 1000 x 1200 mm four-way-access wood pallets, GMA grade B or higher, or 1000 x 1200 mm CHEP pallets. Each pallet is wrapped in clear stretch wrap, stands no more than 180 cm single-stacked, and weighs no more than 500 kg. FBA stock must not be combined with other customer orders in the same shipment. The pallet and truckload page sets these out.

Inside the warehouse, the prep centre still needs its own pallet identity so that stock can be found and traced. Clarus recommends an 18-digit pallet reference, so that it is GS1 compliant, and receipt labels print on A5 or 4×6 stock. That identity is separate from Amazon’s FBA pallet label. The SSCC guide covers the warehouse side, and pallet tracking shows how pallets are followed through the building.

Booking the delivery into the fulfilment centre

Any delivery that is not small parcel must be palletised. Amazon’s pallet and truckload page requires the bill of lading to reference Amazon’s reference IDs and to give the box and pallet quantities. It also says a delivery appointment must be requested at least 24 hours ahead, that bookings go through Carrier Central, and that no load is accepted without an appointment.

Amazon’s appointment page lists what the carrier needs for the booking: the destination fulfilment centre and delivery address, the FBA shipment IDs, the PO or reference ID, the seller name, and the number of pallets, boxes and units. An appointment is mandatory for LTL deliveries. Amazon recommends that the carrier makes the booking rather than the seller. Build the dispatch record in the WMS from these same details, so the carrier’s paperwork matches the pallets that are loaded.

Charging for each prep step

A prep centre can price its work around the same units Amazon asks for: per unit labelled, per bag, per set or bundle, per carton, per pallet, plus storage. Record each task against the client as it happens, rather than rebuilding it from a stock count at month end. That record is what lets the invoice stand up when a client asks why a line appears.

Clarus bills value-added work such as kitting and relabelling alongside storage and handling, and the charges can appear on one itemised invoice, as described on the facturación de clientes page. Each client’s stock, reporting and billing are kept separate within one warehouse. The guide to automating 3PL billing explains how the set-up works. This article does not publish prices. Ask any provider for a written rate card that lists each prep task.

What a WMS for FBA prep should do

A WMS for FBA prep is judged on how well it handles the steps above. Five checks are worth making before you choose one.

  • Keep each client’s stock apart. Each client’s inventory, reporting and billing should sit in its own space inside one warehouse.
  • Check every label by scan. A label that cannot be read at the bench should stop the process, not wait for a customer to find it.
  • Record set and kit builds as tasks. A set built at a bench or on pick should leave a record against the client.
  • Hold the warehouse’s pallet identity apart from Amazon’s labels. Internal tracking should not depend on the FBA label.
  • Record charges as they happen. Each prep task should be captured when it is done, so the invoice reflects the work.

Habla con un experto en almacenes

Si estás valorando tus opciones y quieres ver cómo funciona en la práctica un sistema de gestión de almacenes (WMS) diseñado específicamente para este fin, merece la pena que hables con Clarus. Colaboramos con proveedores de logística externos (3PL) y distribuidores de todo el Reino Unido para implementar un software de gestión de almacenes que se adapte a tu forma de trabajar, y no al revés.

Ponte en contacto con nuestro equipo para discutir tus requisitos.

Preguntas que quizá te estés planteando

Preguntas frecuentes

What is FBA prep?

FBA prep is the work a prep centre does to get a seller’s stock ready for an Amazon fulfilment centre. It covers receiving, labelling, bagging, bundling, carton and pallet building, and booking the delivery.

Does a 3PL need a WMS to run FBA prep?

A small operation can get by on spreadsheets for a while, but a multi-client prep centre needs one count per client, a record of each task, and a scan check on each label. A WMS holds those records in one place.

Who creates the Amazon shipment plan?

The seller creates the shipment plan in Seller Central, and the prep centre packs to match it. What is sent must match the plan, including the quantities, barcodes, expiry dates and box weights and dimensions.

Does Clarus create FBA shipment plans or print FBA labels?

Clarus has an Amazon integration for orders the warehouse fulfils itself. The shipment plan, FNSKU labels and FBA box and pallet labels come from the seller’s Seller Central account, and the WMS runs the physical work around them.

How do you book a delivery into an Amazon fulfilment centre?

Bookings are made in Amazon’s Carrier Central, and an appointment is mandatory for LTL deliveries. Amazon recommends that the carrier makes the booking rather than the seller.

¿Listo para simplificar las operaciones de su almacén?

Últimas perspectivas y tendencias.

Explore más artículos repletos de ideas prácticas, tendencias de la industria y resultados reales de equipos que utilizan sistemas modernos para adelantarse.

WMS for Amazon FBA: How a 3PL Runs FBA Prep

How a 3PL or prep centre runs Amazon FBA prep through a WMS: goods in, FNSKU labels, sets, cartons, pallets, booking and charging.

SAP EWM explained: what it is and what 3PLs should weigh

SAP EWM explained: what SAP Extended Warehouse Management is, how it relates to S/4HANA, and what a 3PL should weigh first.

Expedited Shipping: Meaning and Warehouse Steps

Expedited shipping has no fixed definition, so each carrier sets its own. Here is what the warehouse must do for an expedited promise to hold.